VIGILANT AUTOMATIC TRAFFIC CONTROL BOLLARD
24 VOLT - 200MM DIAMETER X 800MM HIGH
Manufactured in Italy by Beninca The Vigilant is a 24 volt self contained electro mechanical automatic rising bollard. The Vigilant is 200mm wide and is specifically designed as a traffic control bollard delivering a low cost option where security is not so much a concern.
The major advantage of rising bollards over boom gates is the ability
to restrict motor vehicle traffic but still allowing unrestricted pedestrian access and egress. The CP logic control boards all feature battery backup so power outage is not an issue.
Available in powder coat finish or stainless steel.
Bollard 200mm diamter x 800mm high
Bollard 200mm diamter x 800mm high - stainless steel
Vigilant foundation install kit
Control for one bollard in enclosure with batt backup module.
Control for two bollard in enclosure with batt backup module.
Control for four bollard in enclosure with batt backup module.
10 Mtr plug and play cable
15 Mtr plug and play cable
20 Mtr plug and play cable
25 Mtr plug and play cable
Motor Voltage -
24 volts DC
Current Standby -
80mA (Logic control board)
Absorbed power -
Opening time -
Maximum height -
Duty cycle -
1000 operations per day
Underground depth -
Underground width -
Impact resisitance -
Breakout resistance -
IP rating -
DOWNLOAD & MANUALS
FOUNDATION MANUAL -
BOLLARD MANUAL -
LOGIC CONTROL MANUAL -
LOOP DETECTORS - A must have if you use automatic closing function is loop detectors. Loop detectors provide an extra level of safety to prevent bollards from rising on vehicles. Bollard can have a single set but multiple sets are more commonly used. More information and a full list of product here
TRAFFIC LIGHTS - The logic control board is equipped to work with traffic lights which will give vehicles clear instruction on when to proceed or otherwise. Check them out here